Categories

System glitches and false alarms can be exasperating, and even worse, could prevent your home’s security from doing its job effectively. Luckily, most problems, from false alarms to dead batteries, are simple to fix. Explore our suggestions for troubleshooting your home alarm system in Concord. We’ll help keep your household safeguarded and your system operating the way it should.

Test Your Home Security System In Concord

One sensible way to troubleshoot your property’s security is to test it! Modern systems permit you to place them in test mode to avoid triggering an emergency call. After moving to test mode, follow these steps:

• Arm your system as you typically would when heading out.
• Open a door or window protected by a contact sensor, or try to trigger something else. Shut the door or window so it doesn’t trigger the alarm when you switch out of test mode.
• Permit the alarm to sound for 60 seconds to make sure a message is sent to the security provider and an entry is made in the alarm activity log.
• Proceed to test equipment as needed
• Inspect the system activity log to confirm that everything’s working.

Rest assured, monitoring agents will be able to see that your system is being tested. Just make sure to switch off test mode when done. It’s wise to test every other month or whenever you make changes to your home’s phone or internet service.

Inspect The Position And State Of Motion Sensors

Although an integral aspect of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some easy troubleshooting.

• Perform a physical check. Are there things that could move within the sensor’s detection area, like a window treatment blown in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can cause malfunctions. Make sure the sensor is clean.
• Does the motion detector have pet immunity you can turn on? Some can be set to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? A low battery may affect performance or result in false alarms.
• Is the sensor facing a heat source? Excess heat from sunlight or a fireplace can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Signals

One of the great aspects of new home security systems is that they’ll alert you when batteries are dying. If your system uses a control panel or mobile app, you’ll typically see notifications there. Depending on the alarm, you might hear an occasional beep when batteries are running out. 

Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that will have to be replaced every so often. It’s best to keep batteries on hand and set a replacement schedule. Top systems also have a rechargeable backup battery for the central control panel. This backup battery keeps your system running if you have a power outage and should recharge itself once power is restored. If it doesn’t, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Concord 

As the top name in home security, ADT builds systems that provide unrivaled functionality and convenience. Accessing test mode is simple through the ADT+ app or MyADT.com, and you’ll always receive updates when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Concord home and family. Dial (603) 945-0837 or complete our form today!